ÀÚµ¿Â÷°øÇÐÀü¹®´ëÇпø / ÀÚµ¿Â÷°øÇаú , ±¹¹Î´ëÇб³

Home

Professor

Members

Research

Project

Publications

Facilities

Lectures

Sponsors

Links

 

¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬

 

International Journal

1.     Sangrok Lee , Sang Hun Lee, "Multi-attention-based soft partition network for vehicle re-identification", Journal of Computational Design an Engineering, Vol.9, No.6, 2022 (to appear)

2.     Hwisoo Eom, Sang Hun Lee, "Mode Confusion of Human-Machine Interfaces for Automated Vehicles", Journal of Computational Design an Engineering, Vol.9, No.5, pp.1995-2009, 2022

3.     Sang Hun Lee, Se-One Yoon, "User interface for In-Vehicle Systems with On-Wheel Finger Spreading Gestures and Head-Up Displays", Journal of Computational Design and Engineering, Vol.7, No. 6, pp.700-721, 2020

4.     Haerin Lee, Moonki Jung, Ki-Kwang Lee and Sang Hun Lee, "A 3D Human-Machine Integrated Design and Analysis Framework for Squat Exercises with a Smith Machine", Sensors, Vol. 17, No. 2, 299, 2017

5.     Hwisoo Eom, Sang Hun Lee, "Human-Automation Interaction Design for Adaptive Cruise Control Systems of Ground Vehicles", Sensors, Vol. 15, No. 6, pp. 13916-13944, 2015

6.     Dae Ryong Ahn, Sang Hun Lee, "Design and verification of driver interfaces for adaptive cruise control systems", Journal of Mechanical Science and Technology, Vol. 29, No. 6, pp. 2451-2460, 2015

7.     Nam-Chul Choi, Sang Hun Lee, "Discomfort Evaluation of Truck Ingress/Egress Motions Based on Biomechanical Analysis", Sensors, Vol. 15, No. 6, pp. 13568-13590, 2015

8.     Long Zeng, Yong-Jin Liu, Sang Hun Lee, Matthew Ming-Fai Yuen,"Q-Complex: Efficient non-manifold boundary representation with inclusion topology,"Computer-Aided Design, Vol. 44, No. 11, pp. 1115-1126, 2012

9.     Sang Hun Lee, Kunwoo Lee,"Simultaneous and Incremental Feature-based multiresolution modeling with Feature Operation in Part Design,"Computer-Aided Design, Vol. 44, No. 5, pp. 457-483, 2012

10.     Dong-Pyoung Sheen, Tae-geun Son, Dae-Kwang Myung, Cheolho Ryu, Sang Hun Lee, Kunwoo Lee and Tae Jung Yeo,"Transformation of a thin-walled solid model into a surface model via solid deflation,"Computer-Aided Design, Vol. 42, pp. 720-730, 2010

11.   Sang Hun Lee, ¡°Offsetting operations on non-manifold topological models,¡± Computer-Aided Design, Vol.41, No.11, pp.830-846, 2009

12.   Sang Hun Lee, ¡°Feature-based Non-manifold Modeling System to Integrate Design and Analysis of Injection Molding Products¡±, Journal of Mechanical Science and Technology. Vol.23, No.5, 2009

13.   Dong-Pyoung Sheen, Tae-geun Son, Cheolho Ryu, Sang Hun Lee, Kunwoo Lee, ¡°Dimension Reduction of Solid Models by Mid-Surface Generation¡±, International Journal of CAD/CAM, Vol.7, No.1, 2007

14.   Yoonhwan Woo, Sang Hun Lee, ¡°Volumetric modification of solid CAD models independent of design features¡±, Advances in Engineering Software, Vol.37, No.12, pp.826-835, 2006.12

15.   Sang Hun Lee, Kunwoo Lee, ¡°Feature-based multiresolution techniques for product design¡±, Journal of Zhejiang University Science A, Vol.7, No.9, pp.1535-1543, 2006.9

16.   Sang Hun Lee, Kunwoo Lee, Seongchan Kim, ¡°History-Based Selective Boolean Operations for Feature-Based Multi-resolution Modeling¡±, Lecture Note in Computer Science, Vol.3980, pp.459-468, 2006.5

17.   Sang Hun Lee, ¡°Feature-Based Multiresolution Modeling of Solids¡±, ACM Transactions on Graphics, Vol.24, No.4, pp.1417-1441, 2005.10 (°úÇбâ¼ú¿ì¼ö³í¹®»ó)

18.   Kang-Soo Lee, Sang Hun Lee, ¡°Network Based Engineering Design Education¡±, Lecture Notes in Computer Science, Vol.3681, pp.48-55, 2005.9

19.   Sang Hun Lee, ¡°A CAD-CAE integration approach using feature-based multi-resolution and multi-abstraction modelling techniques¡±, Computer-Aided Design, Vol.37, No.9, pp.941-955, 2005.8

20.   Sang Hun Lee , Kyu-Yeul Lee, Yoonwhan Woo, Kang-Soo Lee, ¡°Feature-Based Multi-Resolution Modeling of Solids Using History-Based Boolean Operations-Part I: Theory of History-Based Boolean Operations¡±, Journal of Mechanical Science and Technology, Vol.19, No.2, pp.549-557, 2005.2

21.   Sang Hun Lee, Kyu-Yeul Lee, Yoonwhan Woo, Kang-Soo Lee, ¡°Feature-Based Multi-Resolution Modeling of Solids Using History-Based Boolean Operations-Part II: Implementation Using a Non-Manifold Modeling System¡±, Journal of Mechanical Science and Technology, Vol.19, No.2, pp.558-566, 2005.2

22.   Sang Hun Lee, Kang-Soo Lee,"Local Mesh Decimation for View-Independent Three-Axis NC Milling Simulation", The International Journal of Advanced Manufacturing Technology, Vol.19, No.8, pp.579-586, 2002.5

23.   Sang Hun Lee, Kunwoo Lee,"Partial Entity Structure: A Compact Boundary Representation for Non-Manifold Geometric Modeling", ASME Journal of Computing & Information Science in Engineering, Vol.1, No.4, pp.356-365, 2001.12

 

International Conference

-1.     Sangrok Lee, Eunsoo Park, Hongsuk Yi and Sang Hun Lee, "SBNet: Segmentation-based Network for Natural Language-based Vehicle Search”, IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR), pp. 4054-4060, 2021.6

0.     Dong Wook Kim, Joon Gwon Hwan, Sang Hyeok Lim, Sang Hun Lee, "An Improved Feature Extraction Approach to Image Captioning for Visually Impaired People", IEEE/CVF CVPR 2021 - VizWiz Grand Challenge Workshop, 20121, 6.

1.     Sangrok Lee, Eunsoo Park, Hongsuk Yi and Sang Hun Lee, "StRDAN: Synthetic-to-Real Domain Adaptation Network for Vehicle Re-Identification¡±, Proceedings of the IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR) pp.2590-2597, 2020.6

2.     Sang Hun Lee, Myoung Gu Lee, "Lane Change Detection Using AdaBoost Algorithm", 2019 Asian Conference on Design and Digital Engineering, Penang, Malaysia, 2019.7.7-10

3.     Inhak Lee and Sang Hun Lee, "Modeling Naturalistic Driver Behavior in Traffic using Deep Neural Network", 2018 Asian Conference on Design and Digital Engineering, Okinawa, Japan, 2018.11.1-3

4.     Myung Gu Lee, Inhak Lee and Sang Hun Lee, "Driver Intent Inference for In-Vehicle Equipment Control", Emerging Technologies in Mechanical Engineering, Jeju, Korea, 2018.8.19-22

5.     Myunggu Lee, Yong Suh and Sang Hun Lee, "Deep Learning Based Driver Intent Inference on Highways", 2017 International Symposium on Computational Design and Engineering, Hochimin City, Vietnam, 2017.12.14-16

6.     Sang Hun Lee et al., "VAEGIS: Car that knows before you do via deep learning", 2017 PACE Global Annual Forum, Toluca, Mexico, 2017.7.23~28

7.     Chul Hwan Kim and Sang Hun Lee, "Driver Intent Inference at Urban Intersections using Deep Neural Network", 2017 PACE Global Annual Forum, Toluca, Mexico, 2017.7.23-28

8.     Sang Hun Lee et al, "Vaegis : Driver Protection System Based On Machine Learning and Automated Driving Technologies", 2016 Asian Conference on Design and Digital Engineering (ACDDE2016), Jeju, Korea, 2016.10.25~28

9.     Myunggoo Lee and Sang Hun Lee, "Prediction of Driver's Lane Change Intention Using Multi-Boosting Algorithm", 2016 Asian Conference on Design and Digital Engineering (ACDDE2016), Jeju, Korea, 2016.10.25~28

10.   Haerin Lee, Moonki Jung and Sang Hun Lee, "Virtual Design and Evaluation Framework and Process for Design of Squat Exercise Programs and Machines", 2016 Asian Conference on Design and Digital Engineering (ACDDE2016), Jeju, Korea, 2016.10.25~28

11.   Sang Hun Lee et al, "Intelligent Cockpit for Future Vehicles", 2016 PACE Global Annual Forum, Cincinnati, OH, USA, 2016.7.25-29

12.   Sang Hun Lee, Se-One Yoon, Jae Hoon Shin, "On-wheel Finger Gesture Control for In-vehicle Systems on Central Consoles", Proceedings of the 7th International Conference on Automotive User Interfaces and Interactive Vehicular Applications, Nottingham, UK, pp. 67-71, 2015.09.01-03

13.   Hwisoo Eom, Sang Hun Lee, "Design of Driver-Vehicle Interface to Reduce Mode Confusion for Adaptive Cruise Control Systems", Proceedings of the 7th International Conference on Automotive User Interfaces and Interactive Vehicular Applications, Nottingham, UK, pp. 67-71, 2015.09.01-03

14.   "Passenger Car with Easy Access", GM PACE 2015 Annual Forum, Sao Paulo, Brazil, 2015.07.27-31 (1st Place Award)

15.   Sang Hun Lee, Ji Hyun Yang, Dong Woon Ryu, Hyeon Bin Jeong, Woon-Sung Lee, "Development of Driver-State Estimation Algorithm Based on Hybrid Bayesian Network", Proceedings of the 2015 IEEE Intelligent Vehicle Symposium, pp. 1282-1286, 2015.06.28-07.01

16.   Sang Hun Lee, Dae Ryong Ahn, Ji Hyun Yang, "Mode Confusion in Driver Interfaces for Adaptive Cruise Control Systems", Proceedings of the 2014 IEEE International Conference on Systems, Man, and Cybernetics, San Diego, CA, USA, 2014.10.5-8

17.   Haerin Lee, Sang Hun Lee, "Validation of Synthesized Squat Motion with Smith Machine through Biomechanical Simulation and EMG Measurement", Proceedings of the 2014 Asian Conference on Design and Digital Engineering, Jinan, Shangdong, China, 2014.10.31-11.2

18.   Ji Hyun Yang, Se-One Yoon, Sang Hun Lee, "Development of wheel-gesture control interface to prevent distracted driving", Proceedings of the 2013 Asian Conference on Design and Digital Engineering, Seoul, Korea, EAC-2-5, 2013.08.12-14

19.   Dong-Pyoung Sheen, Tae-geun Son, Dae-Kwang Myung, Cheolho Ryu, Sang Hun Lee, Kunwoo Lee, Tae Jung Yeo,"Solid Deflation Approach to Transform Solid into Mid-Surface", Proceedings of the 7th International Symposium on Tools and Methods of Competitive Engineering, Izmir, Turkey, 2008.04.21-25

20.   Dong-Pyung Sheen, Tae-geun Son, Cheolho Ryu, Sang Hun Lee, Kunwoo Lee, ¡°Dimension Reduction of Solid Models by Mid-Surface Generation¡±, Proceedings of the 3rd Korea-China Joint Conference on Geometric and Visual Computing, Seoul, Korea, pp.241-252, 2007.8.22-24

21.   Kang-Soo Lee, Sang Hun Lee, Sung Hwan Kim, ¡°Development of a Compressor System Using 3D CAD Model Based on CBD Method¡±, Proceedings of the 1st Mongolia-Korea Joint Workshop on CAD/CAM, Ulanbataar, Mongolia, pp.38-47, 2007.7.8-10

22.   Sang Hun Lee, Kun Sang Lee, Kang-Soo Lee, ¡° Design and Production of Mini-formula Machines for CAD/CAM Education¡±, Proceedings of the 1st Mongolia-Korea Joint Workshop on CAD/CAM, Ulanbataar, Mongolia, pp.158-163, 2007.7.8-10

23.   Sang Hun Lee, Sung Lak Lim, ¡°3-D Mold Design System for Pseudo-Solid Product Models¡±, Proceedings of IJCC Workshop 2006 on Digital Engineering, Seoul, Korea, pp.122-127, 2006.2.8-9

24.   Sang Hun Lee, Kyu-Yeul Lee, ¡°Multi-resolution Modeling of Feature-based Solids Based on Non-manifold Topological Framework¡±, Proceedings of ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Long Beach, California, USA, DETC2005-84946, 2005.9.24-28

25.   Sang Hun Lee, Kunwoo Lee, Kyu-Yeol Lee, ¡°Feature-based Multi-resolution and Multi-abstraction Non-manifold Modeling System to Provide Integrated Environment for Design and Analysis of Injection Molding Products¡±, Proceedings of the 1st Korea-China Joint Conference on Geometric and Visual Computing, Hangzhou, China, pp.232-241, 2005.8.24-26

26.   Sang Hun Lee , ¡°CAD and CAE Integration Using Multi-Abstraction Non-Manifold Modelling Method¡±, Computer-Aided Design and App.lications, Vol.1, No.1, pp.585-594, 2004.5

27.   Sang Hun Lee , ¡°Multi-Resolution Modeling for Feature-Based Solid Models Using the Effective Volumes of Features¡±, Computer-Aided Design and Applications, Vol.1, No.1, pp.603-612, 2004.5

28.   Yoonhwan Woo, Sang Hun Lee, ¡°Destructive Modeling by Volume Decomposition and Its App.lications¡±, Proceedings of ASME 2003 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Chicago, Illinois, USA, DETC2003/CIE-48173, pp.25-28, 2003.9.2-6

29.   Sang Hun Lee, Jin-Woo Jang, Kang-Soo Lee, Sangkun Park, Young Moo Huh, Jin Seok Yang,"Boolean Operations on Pseudo-Solid Models and their Application to Mold Design", Proceedings of the 5th International Conference on Engineering Design and Automation, Maui, Hawaii, USA, EDAK6054, 2002.8.4 -7

30.   Kang-Soo Lee, Sang Hun Lee,"Topology Preserving Shell Mesh Modification for Stamping Die Rounding Shape Optimization", Proceedings of 2001 International Conference on Automotive Engineering, Seoul, Korea, ICAE2001S04 , pp.134-138, 2001.12.10-11

31.   Kang-Soo Lee, Kun-Sang Lee, Sang Hun Lee, Chan-Mook Kim, Sang Sup Kim, Seung-Jin Heo,"Researches Using Integrated Computer-Aided Systems for Automotive Development", Proceedings of the 11th International Pacific Conference on Automotive Engineering, Shanghai, China, IPC2001D077, 2001.11.6-9

32.   Kang-Soo Lee, Sang Hun Lee, Kunwoo Lee,"An Approach to Evolutionary Design Using Design Parameters and Goals", Proceedings of the 11th International Pacific Conference on Automotive Engineering, Shanghai, China, IPC2001D068, 2001.11.6-9

33.   Sang Hun Lee, Won Kyung Lee, Kang-Soo Lee,"Rounding Operations on Shell Meshes for Efficient Analysis of Stamping Tools for Automotive Body Panels", Proceedings of the 11th International Pacific Conference on Automotive Engineering, Shanghai, China, IPC2001D067, 2001.11.6-9

34.   Sang Hun Lee, Hyun-Soo Kim,"Sheet Modeling and Thickening Operations Based on Non-Manifold Boundary Representations", Proceedings of ASME 2001 Design Engineering Technical Conferences (DETC¡¯01), Pittsburgh, Pennsylvania, USA, DETC2001/DAC-21010, 2001.9.9?12

35.   Sang Hun Lee,"Feature-based Non-manifold Modelling System for Integration of CAD and CAE Systems for Injection Moulding Products", Proceedings of International Conference on Computer Aided Design and Graphics 2001 (CAD/CG 2001), Kunming, China, pp.717-725, 2001.8.22-24

36.   Sang Hun Lee, Kang-Soo Lee,"Local Mesh Generation for Real-Time Three-Axis Milling Graphical Simulation", Proceedings of International Conference on Computer Aided Design and Graphics 2001 (CAD/CG 2001), Kunming, China, pp. 692-698, 2001.8.22-24

37.   Kang-Soo Lee, Sang Hun Lee,"Optimal Design System for V-Belt Pulley", Proceedings of the 5th International Conference on Engineering Design and Automation, Las Vegas, USA, EDA5K085, 2001.8.5 ?8

38.   Sang Hun Lee, Kunwoo Lee,"Partial Entity Structure: A Compact Non-Manifold Boundary Representation Based on Partial Topological Entities", Proceedings of the Sixth ACM Symposium on Solid Modeling and App.lications, Ann Arbor, Michigan, USA, pp.159-170, 2001.6.6-8

39.   Sang Hun Lee,"Offsetting Operations on Non-manifold Boundary Representation Models with Simple Geometry", Proceedings of the Fifth ACM Symposium on Solid Modeling and App.lications, Ann Arbor, Michigan, USA, pp.42-53, 1999.6.9-11

40.   Kang-Soo Lee, Kunwoo Lee, Younghyun Han, Jinwoong Hong, Sangkun Park, Jeonghoon Hur, Jaehong Ahn, Gyeongjin Lee, Seong joon Kwak, Sunghwan Kim, Sanghun Lee, Youngjin Kim, Jinpyung Jung,"Open Kernel System for Modeling Non-manifold Models Based on Partial Elements", The Fifth SIAM Conference on Geometric Design, Nashville, Tennessee, USA, pp. 26-27, 97.11.3-6

41.   Sang Hun Lee, ¡°Application Development using Geometric Modeling Toolkit¡±, International Workshop for 3D CAD/CAM Developers, Seoul, Korea, 1996.11.19

42.   Younghyun Han, Kunwoo Lee, Youngjin Kim, Gangsoo Lee, Jinwoong Hong, Jaehong Ahn, Junghoon Hur, Kyoungjin Lee, Sanghun Lee, Sunghwan Kim., ¡°A Framework in Developing Kernel Modeler Based on Nonmanifold Boundary Representation¡±, Proceedings of the Pacific Conference on Manufacturing '96, Seoul, Korea, pp.195 -200, 96.10.29-31

 

Domestic Journal

1.     ÀÌ»óÇü, ÀÌ»óÇå, "¿îÀüÀÚÀÇ Â÷¼±º¯°æ Àǵµ ÆľÇÀ» À§ÇÑ ±â°èÇнÀ ¾Ë°í¸®Áò°ú ÀԷº¯¼öÀÇ ¼±Åá±, Çѱ¹CDEÇÐȸ ³í¹®Áý, Á¦25±Ç 1È£, pp. 24-35, 2020.3

2.     ÀÌÇظ°, Á¤¹®±â, ÀÌ»óÇå, "Á¦Ç°°ú ÀÎüÀÇ ÅëÇÕ ¸ðµ¨À» ¹ÙÅÁÀ¸·Î ÇÑ ½º¹Ì½º ½ºÄõÆ® ¿îµ¿ÀÇ °¡»ó ½ÃÇè ÇÁ·¹ÀÓ¿öÅ©", ´ëÇѱâ°èÇÐȸ ³í¹®Áý A, Á¦41±Ç 8È£, pp. 691-701, 2017.8

3.     ½ÉÁö¼º, ÀÌ»óÇå, "Â÷·®³» ½Ã½ºÅÛ¿¡ ´ëÇÑ Á¢ÃË ¹× Á¦½ºÃ³ ¹æ½ÄÀÇ ¿îÀüÀÚ ÀÎÅÍÆäÀ̽º¿¡ °üÇÑ ¿¬±¸", Çѱ¹CAD/CAMÇÐȸ ³í¹®Áý, Á¦21±Ç 1È£, pp. 42-50, 2016.3

4.     ¾È´ë·æ, ¾çÁöÇö, ÀÌ»óÇå, "ÀûÀÀ ¼øÇ× Á¦¾î ½Ã½ºÅÛ¿¡¼­ÀÇ ¸ðµå È¥µ¿¿¡ °üÇÑ ¿¬±¸", ´ëÇѱâ°èÇÐȸ ³í¹®Áý A, Á¦ 39±Ç 5È£, pp. 473-482, 2015.5

5.     ¾çÁöÇö, ÀÌ»óÇå, "±¹¹æ ºÐ¾ßÀÇ Àΰ£-Â÷·® ÀÎÅÍ·¢¼Ç ¿¬±¸", Çѱ¹CAD/CAMÇÐȸ ³í¹®Áý, Á¦18±Ç Á¦3È£, pp.155-166, 2013.6

6.     ÃÖ³²Ã¶, ½ÉÁö¼º, ÀÌ»óÇü, À̱Ɽ, ÀÌ»óÇå,"¸ð»çµÈ ±ÙÀ° ¼öÃà·ÂÀ» ¹ÙÅÁÀ¸·Î ÇÑ Æ®·° ½ÂÇÏÂ÷ µ¿ÀÛÀÇ ºÒÆíµµ Æò°¡", Çѱ¹CAD/CAMÇÐȸ ³í¹®Áý, Á¦17±Ç Á¦1È£, pp.62-71, 2012.2 (¿ì¼ö³í¹®»ó)

7.     ÀÌ»óÇå, °­¹«Áø, ¾ö±¤È£,"¿ÂÅç·ÎÁö ±â¹Ý Áö´ÉÇü ±ÝÇü ¼³°è ½Ã½ºÅÛÀÇ °³¹ß", Çѱ¹CAD/CAMÇÐȸ ³í¹®Áý, Á¦16±Ç Á¦3È£, pp.167-177, 2011.6

8.     ÃÖ³²Ã¶, ½ÉÁö¼º, ±èÀçÈ£, ÀÌ»ó¹¬, ÀÌ»óÇå,"½Â¿ëÂ÷ ½ÂÇÏÂ÷ µ¿ÀÛÀÇ Á¤·®ÀûÀÎ ºÒÆíµµ Æò°¡ ¹æ¹ý", Çѱ¹CAD/CAMÇÐȸ ³í¹®Áý, Á¦15±Ç Á¦5È£, pp.333-342, 2010.10

9.     ¼ÕűÙ, ½Åµ¿Æò, ¸í´ë±¤, ·ùöȣ, ÀÌ»óÇå, ÀÌ°Ç¿ì,"Ư¡Çü»ó±â¹Ý ¼Ö¸®µå ¸ðµ¨ÀÇ °£·«È­ ¹æ¹ý¿¡ °üÇÑ ¿¬±¸", Çѱ¹CAD/CAMÇÐȸ ³í¹®Áý, Á¦15±Ç Á¦3È£, pp.243-252, 2010.6

10.   ±è¼ºÈÆ, ¹Î½ÂÀç, ÀÌ»óÇå,"À§»óÃÖÀû¼³°è °á°ú¸¦ ÀÌ¿ëÇÑ CAD ÀÎÅÍÆäÀ̽º", Çѱ¹CAD/CAMÇÐȸ³í¹®Áý, Á¦14±Ç Á¦4È£, pp.281-289, 2009.8 (¿ì¼ö³í¹®»ó)

11.   ÀÌ»óÇå, ¡°Æ¯Â¡Çü»ó±â¹Ý ´ÙÁßÇØ»óµµ ¸ðµ¨¸µ ±â¹ý¿¡ °üÇÑ ¿¬±¸¡±, Çѱ¹CAD/CAMÇÐȸ³í¹®Áý, Á¦14±Ç Á¦3È£, pp.137-149, 2009.6

12.   Á¤¹®±â , ÀÌ°Ç¿ì , Á¶Çö´ö , ±èÅ¿ì , Ma Yanzhao, ÀÌ»óÇå , ¡° Àΰ£Ä£È­Àû ¼³°è½Ã½ºÅÛÀ» À§ÇÑ µðÁöÅÐ ÀÎü¸ðµ¨ ±¸¼º ¿¬±¸ ¡±, Çѱ¹ CAD/CAM ÇÐȸ³í¹®Áý , Á¦12±Ç Á¦6È£ , pp.429-440, 2007.12

13.   ÀÌ»óÇå , Á¤¹®±â , ÀÌ°Ç¿ì , Á¶Çö´ö , Ma Yanzhao, ¡° Àΰ£°øÇÐÀû Á¦Ç°°³¹ßÀ» À§ÇÑ µðÁöÅÐ ÀÎü ¸ðµ¨¸µ ¡±, Çѱ¹ CAD/CAM ÇÐȸÁö , Á¦13±Ç Á¦1È£ , pp.28-35, 2007.6

14.   ÀÌ»óÈ­ , ÀÌ»óÇå , À¯½Â¿ì , ¡° ÀÚµ¿Â÷ ÇÁ·¹½º ±ÝÇü ¼³°è¸¦ À§ÇÑ 3 Â÷¿ø CAD ½Ã½ºÅÛÀÇ °³¹ß ¡±, Çѱ¹ CAD/CAM ÇÐȸ ³í¹®Áý , Á¦12±Ç Á¦1È£ , pp.39-49, 2007.2

15.   ÀÌ»óÇå , À̱Կ­ , ¡° Ư¡Çü»ó±â¹Ý ´ÙÁßÇØ»óµµ ¸ðµ¨¸µ¿¡ °üÇÑ ¿¬±¸ - Part II: ½Ã½ºÅÛ ±¸Çö ¹× »ó¼¼¼öÁØ ÆǴܱâÁØ", Çѱ¹ CAD/CAM ÇÐȸ³í¹®Áý , Á¦10±Ç Á¦6È£ , pp.444-454, 2005.12

16.   ÀÌ»óÇå , À̱Կ­ , ¡° Ư¡Çü»ó±â¹Ý ´ÙÁßÇØ»óµµ ¸ðµ¨¸µ¿¡ °üÇÑ ¿¬±¸ - Part I: Ư¡Çü»óÀÇ À¯È¿¿µ¿ª", Çѱ¹ CAD/CAM ÇÐȸ ³í¹®Áý , Á¦10±Ç Á¦6È£ , pp.432-443, 2005.12

17.   ÀÌ»óÇå , ÀÓ¼º¶ô , ÀÌ°­¼ö , ¡° ÀÇ»ç ¼Ö¸®µå ºÎÇ° ¸ðµ¨¿¡ ´ëÇÑ ±ÝÇü ¼³°è ½Ã½ºÅÛÀÇ °³¹ß", Çѱ¹ CAD/CAM ÇÐȸ³í¹®Áý , Á¦10±Ç Á¦3È£ , pp.151-161, 2005.6

18.   ÀÌ»óÇå , ÀÌ°­¼ö , ¡°3D PLM ½Ã½ºÅÛÀ» ÀÌ¿ëÇÑ F-125 Â÷·®ÀÇ °³¹ß ¡±, Çѱ¹ CAD/CAM ÇÐȸ ³í¹®Áý , Á¦10±Ç Á¦2È£ , pp.77-88, 2005.4

19.   ¹Ú»ó±Ù , ÀÌ»óÇå , ¡° °£°áÇÏ°í È¿À²ÀûÀÎ Æú¸®°ï ¸Þ½¬ÀÇ Ç¥Çö ±¸Á¶ ¡±, Çѱ¹ CAD/CAM ÇÐȸ ³í¹®Áý , Á¦9±Ç Á¦4È£ , pp.294-305, 2004.12

20.   ¹Ú¼º±Õ , ÀÌ»óÇå , ÀÌ°­¼ö , ¡° Æí¸®ÇÑ ÀԷ¹æ½ÄÀÇ ´ÜÁ¶°øÁ¤ Çؼ®À» À§ÇÑ CAMPform2D ÀÇ Preprocessor °³¹ß ¡±, Çѱ¹ CAD/CAM ÇÐȸ ³í¹®Áý , Á¦9±Ç Á¦2È£ , pp.133-142, 2004.6

21.   Á¶º´Ã¶ , ÀÌ»óÇå , ±èÇüÁØ , ¿ìÀ±È¯ , ÀÌ°­¼ö , ¡° Â÷ü Á¶¸³¿ë ¿ëÁ¢ Áö±× ¼³°èÀü¿ë CAD ½Ã½ºÅÛ °³¹ß ¡±, Çѱ¹ CAD/CAM ÇÐȸ ³í¹®Áý , Á¦7±Ç Á¦3È£ , pp.189-200, 2003.9

22.   ÀÌ°­¼ö , ÀÌ»óÇå , ¡°PDM ½Ã½ºÅÛ¿¡¼­ ¿î¿ëµÇ´Â DMU ½Ã½ºÅÛ °³¹ß ¡±, Çѱ¹ CAD/CAM ÇÐȸ ³í¹®Áý , Á¦8±Ç Á¦3È£ , pp.157-166, 2003.9

23.   ÀÌ°­¼ö , È«Á¾ÇØ , ¼ÕÁ¾È£ , ÀÌ»óÇå ,"V º§Æ®¿ë Ç®¸® ¼³°è / Çؼ® ½Ã½ºÅÛ °³¹ß", Çѱ¹ÀÚµ¿Â÷°øÇÐȸ ³í¹®Áý , Á¦10±Ç Á¦6È£ , pp.209-218, 2002.11

24.   ÀÌ¿ø°æ , ÀÌ»óÇå , ÀÎÁ¤Á¦,"½© À¯ÇÑ ¿ä¼Ò ¸ðµ¨ÀÇ ¶ó¿îµù ±â´É °³¹ß", Çѱ¹ CAD/CAM ÇÐȸ ³í¹®Áý , Á¦6±Ç Á¦2È£ , pp.111-124, 2001.6.

25.   ÁÖ¼º¿í , ÀÌ»óÇå , ¹Ú±âÇö ,"½Ç½Ã°£ 3 Ãà NC ¹Ð¸µ ½Ã¹Ä·¹À̼ÇÀ» À§ÇÑ ¸Þ½¬ °£·«È­ ¹æ¹ý", Çѱ¹ CAD/CAM ÇÐȸ ³í¹®Áý , Á¦5±Ç Á¦4È£ , pp.347-358, 2000.12

26.   ±è Çö¼ö , ÀÌ»óÇå ,"¾ãÀº µÎ²² ¼Ö¸®µåÀÇ È¿À²ÀûÀÎ ¸ðµ¨¸µÀ» À§ÇÑ ¹ÚÆÇ ¿É¼Â ¾Ë°í¸®Áò °³¹ß", Çѱ¹ CAD/CAM ÇÐȸ ³í¹®Áý , Á¦5±Ç Á¦3È£ , pp.242-254, 2000.9

27.   ÀÌ»óÇå,"ºñ´Ù¾çü ¸ðµ¨ÀÇ ¿É¼Â ±â´É °³¹ß", Çѱ¹CAD/CAM ÇÐȸ ³í¹®Áý, Á¦3±Ç Á¦1È£, pp.1-14, 98.3

28.   ÀÌ»óÇå, ÀÌ°Ç¿ì, ¡°»çÃâ ¼ºÇü Á¦Ç°ÀÇ ¼³°è ¹× Çؼ®ÀÇ ÅëÇÕ È¯°æÀ» Á¦°øÇϱâ À§ÇÑ Æ¯Â¡ Çü»ó ±â¹Ý ºñ´Ù¾çü ¸ðµ¨¸µ ½Ã½ºÅÛÀÇ °³¹ß¡±, Çѱ¹CAD/CAM ÇÐȸ ³í¹®Áý, Á¦1±Ç 2È£, pp.133 -149, 96.8 (°¡ÇåÇмú»ó)

29.   ÀÌ»óÇå, ÀÌ°Ç¿ì, ¡°ºñ´Ù¾çü À§»ó Ç¥ÇöÀ» ¹ÙÅÁÀ¸·ÎÇÑ ¹ÚÆÇ Çü»ó ¸ðµ¨¸µ ¹× ¼Ö¸®µå·ÎÀÇ º¯È¯¡±, Çѱ¹Á¤¹Ð°øÇÐȸÁö, Á¦13±Ç 7È£, pp.100 -114, 96.7

30.   ÀÌ»óÇå, ÀÌ°Ç¿ì, ¡°ºñ´Ù¾çü Çü»ó ¸ðµ¨¸µÀ» À§ÇÑ °£°áÇÑ °æ°è Ç¥Çö ¹× È®ÀåµÈ ¿ÀÀÏ·¯ ÀÛ¾÷ÀÚ¡±, Çѱ¹CAD/CAM ÇÐȸ ³í¹®Áý, Á¦1±Ç 1È£, pp. 1-19, 96.3

 

Domestic Conference

1.     ÀÌ»óÇå, ¼ÛÁØÇÏ, ÆíÇö±¸, ¼Û»çÇå, "¼¾¼­Ç»Àü ¹× Åë½ÅÀ» ÀÌ¿ëÇÑ Â÷·® ¹× ÁÖº¯ ȯ°æÀÇ ¿ø°Ý °¨½Ã ½Ã½ºÅÛ¿¡ °üÇÑ ¿¬±¸", 2020 Çѱ¹CDEÇÐȸ µ¿°èÇмú´ëȸ, P-43, 2020-02-05 ~ 08

2.     À±¼¼¿ø, ÀÌ»óÇå, "Â÷·® ³»ºÎ ±â±âÀÇ ´ÙÁß ¸ðµå »ç¿ëÀÚ ÀÎÅÍÆäÀ̽º °³¹ß", ´ëÇѱâ°èÇÐȸ ITÀ¶Çպι® 2019³âµµ Ãá°èÇмú´ëȸ, Fr03P05, 2019-04-26

3.     ÀÌ»óÇå, ¼Û¼öâ, ¹Ú±¤±Ô, "ÇÖ ½ºÅÆÇÎ ±ÝÇüÀÇ ³Ã°¢ ä³Î ÀÚµ¿ ¼³°è ÇÁ·Î±×·¥ °³¹ß", 2019 Çѱ¹CDEÇÐȸ µ¿°èÇмú´ëȸ, P-60, 2019-01-25

4.     À¯¼¼Ã¢, ¹Ú¼ºÈÆ, ÀÌ»óÇå, "½ºÅ×·¹¿À Ä«¸Þ¶ó¿Í µö ·¯´× ±â¹ýÀ» ÀÌ¿ëÇÑ °³ÀÎ À̵¿ ¼ö´ÜÀÇ Àü¹æ Ãæµ¹ °æ°í ½Ã½ºÅÛ", 2018 Çѱ¹CDEÇÐȸ ÇÏ°èÇмú´ëȸ, P-161, 2018-08-23

5.     ÀÌÀÎÇÐ, Á¤Á¾¿±, Á¶°­Èñ, ÀÌ»óÇå, "½ÉÃþ ½Å°æ¸ÁÀ» ÀÀ¿ëÇÑ ÀÚ¿¬½º·¯¿î ¿îÀü Çൿ ¸ðµ¨¸µ", 2018 Çѱ¹CDEÇÐȸ ÇÏ°èÇмú´ëȸ, P-115, 2018-08-23

6.     ¾öÈÖ¼ö, ÀÌ»óÇå "?ÀÚµ¿È­ Â÷·®ÀÇ ¿îÀüÀÚ ÀÎÅÍÆäÀ̽º °³¹ß", ?2018 ´ëÇѱâ°èÇÐȸ ITÀ¶Çպι® Ãá°èÇмú´ëȸ, Fr05P0, 2018-05-18

7.     ÀÌ»óÇå, Á¤ÁøÇÑ, ¼­µ¿À±, "ÀΰøÁö´É ±â¹Ý ¿îÀüÀÚ Àǵµ ÆÄ¾Ç ½Ã½ºÅÛ °³¹ß", 2018 Çѱ¹CDEÇÐȸ µ¿°èÇмú´ëȸ, P-30, 2018-01-25

8.     ÀÌ»óÇå , ¼Û¼öâ , ¹Ú±¤±Ô, "ÇÖ ½ºÅÆÇÎ ±ÝÇüÀÇ ³Ã°¢ ä³Î ¼³°è ÀÚµ¿È­", 2018 Çѱ¹CDEÇÐȸ µ¿°èÇмú´ëȸ, P-43, 2018-01-25

9.     ÀÌ»óÇå ¿Ü, "ÇÕ¼º°ö ½Å°æ¸Á(CNN)À» ÀÌ¿ëÇÑ Â÷¼± º¯°æ Àǵµ ¿¹Ãø", 2017 Çѱ¹ÄÄÇ»ÅÍÁ¾ÇÕÇмú´ëȸ, pp.1974-6, 2017-12-22

10.   ±èöȯ, ÀÌ»óÇå "½ÉÃþ½Å°æ¸ÁÀ» ÀÌ¿ëÇÑ ±³Â÷·Î¿¡¼­ÀÇ ÁÖÇà Àǵµ ¿¹Ãø", Çѱ¹CDEÇÐȸ 2017ÇÏ°èÇмú´ëȸ, pp.57-61, 2017-08-17

11.   ±èöȯ, ÀÌ»óÇå, "µö ·¯´× ¾Ë°í¸®ÁòÀ» ÀÌ¿ëÇÑ ¿îÀüÀÚÀÇ Àǵµ ¿¹Ãø", 2017 Çѱ¹CDEÇÐȸ µ¿°èÇмú´ëȸ, I-4, 2017-02-09

12.   ¾öÈÖ¼ö, ÀÌ»óÇå, "½º¸¶Æ® Â÷·®ÀÇ ¿îÀüÀÚ ÀÎÅÍÆäÀ̽º ¼³°è", Çѱ¹Á¤º¸°úÇÐȸ Á¦43ȸ µ¿°èÇмú¹ßǥȸ, P4.8-08, 2016-12-22

13.   ÀÌ»óÇå ¿Ü 9ÀÎ, "±â°èÇнÀ±â¹ýÀ» ÀÌ¿ëÇÑ ÀÚÀ²ÁÖÇàÂ÷·®ÀÇ ¾ÈÀü¿îÀü", ´ëÇѱâ°èÇÐȸ 2016³âµµ Çмú´ëȸ, pp. 1325-1326, 2016-12-15

14.   ÀÌ¸í±¸, ±èöȯ, ÀÌ»óÇå, "½ÉÃþ ½Å°æ¸Á°ú ÇÕ¼º°ö ½Å°æ¸ÁÀ» ÀÌ¿ëÇÑ ¿îÀüÀÚÀÇ Â÷¼±º¯°æ Àǵµ ¿¹Ãø", Çѱ¹ÀÚµ¿Â÷°øÇÐȸ 2016 Ãß°èÇмú´ëȸ, p.397, 2016-11-17

15.   ÀÌ¸í±¸, ÀÌ»óÇå, "µö ´º·² ³×Æ®¿öÅ© ¾Ë°í¸®ÁòÀ» ÀÌ¿ëÇÑ ¿îÀüÀÚÀÇ ÁÖÇà Àǵµ ¿¹Ãø", 2016 Çѱ¹CDEÇÐȸ ºÎ¹®¿¬ÇÕÇмú´ëȸ, pp. 373-375, 2016-08-26

16.   À±¼º¹®, ±èöȯ, ÀÌ¸í±¸, ¾öÈÖ¼ö, ÀÌ»óÇå, "±â°èÇнÀÀ» ÀÌ¿ëÇÑ Áö´ÉÇüÂ÷·®ÀÇ Co-Pilot ½Ã½ºÅÛ", 2016 Çѱ¹CDEÇÐȸ ºÎ¹®Çмú´ëȸ, S20-3, 2016-08-26

17.   ÀÌ¸í±¸, ÀÌ»óÇå, "Ramdom Forest¸¦ ÀÌ¿ëÇÑ ¿îÀüÀÚÀÇ Â÷¼±º¯°æ Àǵµ ¿¹Ãø", 2016 Çѱ¹ÄÄÇ»ÅÍ Á¾ÇÕÇмú´ëȸ, P.2.3-06, 2016-06-30

18.   ¼º³«¿ø, ÀÌÇظ°, ÀÌ»óÇå, "½ÂÇÏÂ÷ ÆíÀǸ¦ °í·ÁÇÑ ½Â¿ëÂ÷ ¼³°è", ´ëÇѱâ°èÇÐȸ ITÀ¶Çպι® 2016³âµµ Ãá°èÇмú´ëȸ, pp. 106-107, 2016-05-20

19.   ÀÌ¸í±¸, ÀÌ»óÇå, "Deep Belief Networks À» ÀÌ¿ëÇÑ ÁÖÇà»óÅ ¿¹Ãø", Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ, pp. 117-118, 2016-01-27

20.   ÀÌÇظ°, À̱Ɽ, ÀÌ»óÇå, "µðÁöÅÐ ÀÎü ¸ðµ¨À» ÀÌ¿ëÇÑ µ¿ÀÛ º¯È­¿¡ µû¸¥ »ýü¿ªÇÐ ºÐ¼® ", Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ, pp. 307-309, 2016-01-27

21.   ÀÌ»óÇå, ¼º³«¿ø, ÀÌÇظ°, "½ÂÇÏÂ÷°¡ Æí¸®ÇÑ È¸ÀüÇü µµ¾î ¹× ½ÃÆ® ÀåÂø ½Â¿ëÂ÷ °³¹ß", Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ, pp. 310-320, 2016-01-27

22.   ¾öÈÖ¼ö, ÀÌ»óÇå, "ÀÚÀ²ÁÖÇà½Ã½ºÅÛÀ» À§ÇÑ HMI ¼³°è ¹× °ËÁõ", Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ, pp. 119-122, 2016-01-27

23.   ¾öÈÖ¼ö, ÀÌ»óÇå, "NHTSAÀÇ ÀÚµ¿È­ ¼öÁØÀ» ¹ÙÅÁÀ¸·Î ÇÑ ¿îÀüÀÚ-Â÷·® ÀÎÅÍÆäÀ̽º ¼³°è", Çѱ¹Á¤º¸°úÇÐȸ 2015³â µ¿°èÇмú¹ßǥȸ, pp. 1166-1168, 2015-12-17

24.   ÀÌ¸í±¸, ÀÌ»óÇå, "¿îÀüÀÚÀÇ ±³Â÷·Î »óÀÇ ÁÖÇàÀǵµ ¿¹ÃøÀ» À§ÇÑ µö·¯´× ¾Ë°í¸®ÁòÀÇ Àû¿ë", 2015 Çѱ¹ÀÚµ¿Â÷°øÇÐȸ Á¤±âÇмú´ëȸ ¹× Àü½Ãȸ, pp. 626-627, 2015-11-19

25.   ¾öÈÖ¼ö, ÀÌ»óÇå, "ÀÚÀ²ÁÖÇà½Ã½ºÅÛÀ» À§ÇÑ Àΰ£-Â÷·® ÀÎÅÍ·¢¼Ç ¿îÀüÀÚ ÀÎÅÍÆäÀ̽º ¼³°è ¹× Æò°¡", 2015 Çѱ¹ÀÚµ¿Â÷°øÇÐȸ Á¤±âÇмú´ëȸ ¹× Àü½Ãȸ, p. 662, 2015-11-19

26.   ÀÌÇظ°, ÀÌ»óÇå, "¿îµ¿¿ªÇÐÀû ºÐ¼®À» ¹ÙÅÁÀ¸·Î ÇÑ ½Â¿ëÂ÷ ½ÂÇÏÂ÷ µ¿ÀÛÀÇ ºÒÆíµµ Æò°¡", 2015 Çѱ¹ÀÚµ¿Â÷°øÇÐȸ Á¤±âÇмú´ëȸ ¹× Àü½Ãȸ, p. 778, 2015-11-18

27.   ¾öÈÖ¼ö, ÀÌ»óÇå "´Ù¾çÇÑ ADAS¸¦ °®Ãá °íÀÚµ¿È­ Â÷·®ÀÇ »ç¿ëÀÚ ÀÎÅÍÆäÀ̽º °³¹ß", ´ëÇѱâ°èÇÐȸ ⸳ 70Áֳ⠱â³ä Çмú´ëȸ, pp. 3315-3317, 2015-11-12

28.   ÀÌ¸í±¸ ÀÌ»óÇå, "¸ÖƼºÎ½ºÆà ¾Ë°í¸®ÁòÀ» ÀÌ¿ëÇÑ Â÷¼±º¯°æ ¿¹Ãø", 2015 Çѱ¹CAD/CAMÇÐȸ ÇÏ°èÇмú´ëȸ, pp.292-295, 2015.8 (¿ì¼ö³í¹®»ó)

29.   ÀÌÇظ°, À̱Ɽ, ÀÌ»óÇå, "µðÁöÅÐ ÀÎü ¸ðµ¨À» ÀÌ¿ëÇÑ ¼³°è¿ä¼Ò º¯È­¿¡ µû¸¥ ½ÂÇÏÂ÷ µ¿ÀÛ¿¡ ´ëÇÑ »ýü¿ªÇкм®", 2015 Çѱ¹CAD/CAMÇÐȸ ÇÏ°èÇмú´ëȸ, pp.271-273, 2015.8

30.   ¾öÈÖ¼ö, ½ÅÀçÈÆ, ÀÌ»óÇå, "ÀÚÀ²ÁÖÇàÂ÷·®¿¡¼­ÀÇ ¸ðµå È¥µ¿ °¨¼Ò¸¦ À§ÇÑ ÃÖÀûÈ­µÈ HVI ÀÎÅÍÆäÀ̽º ¼³°è ¹× Æò°¡", 2015 Çѱ¹CAD/CAMÇÐȸ ÇÏ°èÇмú´ëȸ, pp.296-298, 2015.8

31.   ±èöȯ, ¼­¼¼·É, ÀÌ»óÇå, "OpenDS¸¦ ÀÌ¿ëÇÑ Áö´ÉÇü Â÷·® ¿îÀü ½Ã¹Ä·¹ÀÌÅÍ ±¸Ãà", 2015 Çѱ¹CAD/CAMÇÐȸ ÇÏ°èÇмú´ëȸ, pp.491-493, 2015.8 (¿ì¼öÆ÷½ºÅÍ»ó)

32.   ÀÌ¸í±¸, ÀÌ»óÇå, "Â÷¼±º¯°æ¿¹ÃøÀ» À§ÇÑ SVM ¾Ë°í¸®Áò°ú AdaBoost±â¹ýÀÇ Àû¿ë", 2015 Çѱ¹ÄÄÇ»ÅÍÁ¾ÇÕÇмú´ëȸ, pp.-, 2015.6

33.   ¾öÈÖ¼ö, ÀÌ»óÇå, "ÀûÀÀ¼øÇ×Á¦¾î½Ã½ºÅÛÀ» À§ÇÑ »ç¿ëÀÚ ÀÎÅÍÆäÀ̽º µðÀÚÀÎ ¹× Æò°¡", 2015 Çѱ¹ÀÚµ¿Â÷°øÇÐȸ ºÎ¹®Á¾ÇÕ Çмú´ëȸ, pp.-, 2015.5

34.   ÀÌÇظ°, ¼³µ¿ÈÆ, ÀÌ»óÇå, "µðÁöÅÐ ÀÎü ¸ðµ¨À» ÀÌ¿ëÇÑ ½Â¿ëÂ÷ ½ÂÇÏÂ÷ µ¿ÀÛÀÇ Á¤·®ÀûÀÎ ºÒÆíµµ Æò°¡", 2015 Çѱ¹ÀÚµ¿Â÷°øÇÐȸ ºÎ¹®Á¾ÇÕ Çмú´ëȸ, pp.-, 2015.5

35.   ÀÌ¸í±¸, ÀÌ»óÇå, "Â÷¼±º¯°æ Àǵµ ¹× ÁÖÇà»óÅ ¿¹ÃøÀ» À§ÇÑ ±â°èÇнÀ ±â¹ý ±¸¼º ¼º´É ºñ±³", 2015 Çѱ¹ÀÚµ¿Â÷°øÇÐȸ ºÎ¹®Á¾ÇÕ Çмú´ëȸ, pp.-, 2015.5

36.   ¾öÈÖ¼ö, ÀÌ»óÇå, "´Ù¾çÇÑ ÀÚµ¿È­ ¼öÁØÀ» °®´Â ÀÚÀ²ÁÖÇàÂ÷·®ÀÇ ¿îÀüÀÚ ÀÎÅÍÆäÀ̽º °³¹ß", 2015 Çѱ¹CAD/CAMÇÐȸ µ¿°èÇмú´ëȸ, pp.-, 2015.2

37.   ÀÌ¸í±¸, ÀÌ»óÇå, "¿îÀüÀÚÀÇ Â÷¼±º¯°æ Àǵµ ¿¹ÃøÀ» À§ÇÑ ÃÖÀûÀÇ ¸Ó½Å·¯´× ±â¹ý ±¸¼º", 2015 Çѱ¹CAD/CAMÇÐȸ µ¿°èÇмú´ëȸ, pp.-, 2015.2

38.   ÀÌÇظ°, À̱Ɽ, ÀÌ»óÇå, "½º¹Ì½º ¸Ó½ÅÀ» ÀÌ¿ëÇÑ ½ºÄõÆ® µ¿ÀÛ¿¡ ´ëÇÑ °üÀýÀÇ »ó°ü°ü°è¸¦ °í·ÁÇÑ ±Ù°ñ°Ý ¸ðµ¨ »ý¼º", 2015 Çѱ¹CAD/CAMÇÐȸ µ¿°èÇмú´ëȸ, pp.-, 2015.2

39.   ¾öÈÖ¼ö, ÀÌ»óÇå, "NHTSA ¼öÁØ 1 ¹× 2ÀÇ ÀÚµ¿È­ Â÷·® À§ÇÑ ¿îÀüÀÚ-Â÷·® ÀÎÅÍÆäÀ̽º °³¹ß", 2014 Çѱ¹ÀÚµ¿Â÷°øÇÐȸ Çмú´ëȸ ¹× Àü½Ãȸ, pp.-, 2014.11

40.   ÀÌ¸í±¸, ÀÌ»óÇå, "¿îÀüÀÚÀÇ Â÷¼±º¯°æ Àǵµ ¿¹ÃøÀ» À§ÇÑ ¸é¼ö ¹× ±â°èÇнÀ ±â¹ýÀÇ ¼±Á¤", 2014 Çѱ¹ÀÚµ¿Â÷°øÇÐȸ, pp.-, 2014.11

41.   ÀÌ¸í±¸, Á¤Çöºó, ¾çÁöÇö, ÀÌ»óÇå, "¿îÀüÀÚÀÇ À½¼º, ¿µ»ó ¹× »ýü ½ÅÈ£¿Í Â÷·® »óÅ Á¤º¸¸¦ ÀÌ¿ëÇÑ Â÷·®³» ±â±â Á¶ÀÛÀǵµ Æľǿ¡ °üÇÑ ¿¬±¸", 2014 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ, pp.690-693, 2014.8

42.   ÀÌÇظ°, ±èÇý¸®, Gizem Okaya, Á¤¹®±â, À̱Ɽ, ÀÌ»óÇå, "½º¹Ì½º ¸Ó½ÅÀ» ÀÌ¿ëÇÑ ½ºÄõÆ® µ¿ÀÛÀÇ ±ÙÀüµµ µ¥ÀÌÅÍ¿Í ±Ù°ñ°Ý Çؼ® ½Ã½ºÅÛÀÇ ½Ã¹Ä·¹ÀÌ¼Ç °á°ú µ¥ÀÌÅÍ ºñ±³", 2014 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ, pp.517-521, 2014.8 (¿ì¼ö³í¹®»ó)

43.   ÀÌ¸í±¸, ÀÌ»óÇå, "¿îÀüÀÚ Â÷¼±º¯°æ Àǵµ ¿¹ÃøÀ» À§ÇÑ ¸Ó½Å·¯´× ±â¹ýÀÇ ÃÖÀûÈ­", 2014 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ, pp.436-439, 2014.8

44.   ¾öÈÖ¼ö, ÀÌ»óÇå, "÷´Ü¿îÀüÀÚº¸Á¶½Ã½ºÅÛÀÇ ¿îÀüÀÚÀÎÅÍÆäÀ̽º¿¡ °üÇÑ ¿¬±¸", 2014 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ, pp.432-435, 2014.8

45.   ·ùµ¿¿î, ÃÖ¼±¿ì, Á¤Çöºó, ¾çÁöÇö, ÀÌ»óÇå, "ÇÏÀ̺긮µå º£ÀÌÁö¾È ³×Æ®¿öÅ© ±â¹Ý ¿îÀüÀÚ »óÅ ÅëÇÕ ÆÇ´Ü ¾Ë°í¸®Áò °³¹ß¿¡ °üÇÑ ¿¬±¸", 2014 Çѱ¹ÀÚµ¿Â÷°øÇÐȸ Çмú´ëȸ ¹× Àü½Ãȸ, pp.677-678, 2014.5

46.   ¾È´ë·æ, ¾çÁöÇö, ÀÌ»óÇå, "ÀûÀÀ¼øÇ×Á¦¾î½Ã½ºÅÛÀ» °®Ãá Â÷·®¿¡¼­ÀÇ ¸ðµåÈ¥µ¿¿¡ °üÇÑ ¿¬±¸", 2014 Çѱ¹ÀÚµ¿Â÷°øÇÐȸ Çмú´ëȸ ¹× Àü½Ãȸ, pp.680-682, 2014.5

47.   ±è¼º·¡, ·ùµ¿¿î, ¾çÁöÇö, ÀÌ»óÇå, "ÁÖÀÇ ºÐ»êÀ» ¿¹¹æÇϱâ À§ÇÑ Á¦½ºÃ³ ±â¹Ý ÀÎÅÍÆäÀ̽º °³¹ß", 2014Çѱ¹ÀÚµ¿Â÷°øÇÐȸ Çмú´ëȸ ¹× Àü½Ãȸ, pp.628-630, 2014.5

48.   ¾È´ë·æ, ¾çÁöÇö, ÀÌ»óÇå, "½Â¿ëÂ÷ ÀûÀÀ¼øÇ×Á¦¾î½Ã½ºÅÛÀÇ ¿îÀüÀÚ ÀÎÅÍÆäÀ̽º¿¡ °üÇÑ ¿¬±¸",´ëÇѱâ°èÇÐȸ ITÀ¶Çպι® 2014³âµµ Ãá°è Çмú´ëȸ, pp.21-22, 2014.4 (¿ì¼ö³í¹®»ó)

49.   ÃÖ¼±¿ì, ·ùµ¿¿î, ¾È´ë·æ, ¾çÁöÇö, ÀÌ»óÇå, "DSRC ±â¹Ý ±¸±ÞÂ÷ Á¢±Ù °æº¸ ½Ã½ºÅÛ È¿¿ë¼º °ËÁõÀ» À§ÇÑ ¿îÀüÀÚ ¸ðµ¨¸µ ±âÃÊ Á¶»ç", 2014 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ, pp.629-633, 2014.2

50.   ·ùµ¿¿î, ÃÖ¼±¿ì, ±èÇüÁØ, Á¤Çöºó, ¾çÁöÇö, ÀÌ»óÇå, "Áö´ÉÇü ĬÇÍ ¸ðµâÀÇ ÅëÇÕ Àΰ£-Â÷·® ÀÎÅÍ·¢¼Ç ¸Å´ÏÀú ¾Ë°í¸®Áò °³¹ßÀ» À§ÇÑ ±âÃÊ ¿¬±¸", 2014 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ, pp.481-485, 2014.2

51.   ÀÌ»óÇö, ¾çÁöÇö, ÀÌ»óÇå, "±â°è ÇнÀÀÇ ¾Ó»óºí ±â¹ýÀ» ÀÌ¿ëÇÑ ¿îÀüÀÚ Â÷¼± º¯°æ Àǵµ ¿¹Ãø", 2014 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ, pp.493-495, 2014.2

52.   ¾È´ë·æ, ¾çÁöÇö, ÀÌ»óÇå, "ACC¿Í LKA ½Ã½ºÅÛÀÌ Å¾ÀçµÈ Â÷·®ÀÇ ¸ðµå È¥µ¿¿¡ °üÇÑ ¿¬±¸," 2014 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ, pp.486-492, 2014.2

53.   ÃÖ¼±¿ì, ·ùµ¿¿î, ¾È´ë·æ, ¾çÁöÇö, ÀÌ»óÇå, "DSRC ±â¹Ý ±¸±ÞÂ÷ Á¢±Ù °æº¸ ½Ã½ºÅÛ ¼³°è ¹× È¿¿ë¼º ½Ã¹Ä·¹À̼Ç", 2013 Çѱ¹ÀÚµ¿Â÷°øÇÐȸ Çмú´ëȸ ¹× Àü½Ãȸ, pp.756-757, 2013.11

54.   ÀÌ»óÇü, ¾È´ë·æ, ¾çÁöÇö, ÀÌ»óÇå, "°áÁ¤Æ®¸® ¸Ó½Å·¯´× ±â¹ýÀ» ÀÌ¿ëÇÑ ¿îÀüÀÚ Â÷¼±º¯°æ Àǵµ Ãß·Ð", 2013 Çѱ¹ÀÚµ¿Â÷°øÇÐȸ Çмú´ëȸ ¹× Àü½Ãȸ, pp.740-741, 2013.11

55.   ·ùµ¿¿î, À±¼¼¿ø, ¾çÁöÇö, ÀÌ»óÇå, "Validation of a New In-vehicle Control Interface Using Eye- and Head-tracking Systems," 2013 ´ëÇÑÀΰ£°øÇÐȸ Ãß°èÇмú´ëȸ ³í¹®Áý, pp.478-471, 2013.10

56.   ÃÖ³²Ã¶, À̱Ɽ, ¾çÁöÇö, ÀÌ»óÇå, "Development of Discomfort Evaluation Method for Truck Ingress and Egress Motions Based on Muscle Force Simulation," 2013 ´ëÇÑÀΰ£°øÇÐȸ Ãß°èÇмú´ëȸ ³í¹®Áý, pp.193-195, 2013.10

57.   ¾çÁöÇö, ÀÌ»óÇå, " Development of UAV supervisory control interfaces SAWSI and RESCHU-SA," 2013 ´ëÇÑÀΰ£°øÇÐȸ Ãß°èÇмú´ëȸ ³í¹®Áý, pp.-, 2013.10

58.   ÀÌ»óÇü, ¾çÁöÇö, ÀÌ»óÇå, "¿îÀüÀÚÀÇ Â÷¼± º¯°æ Àǵµ ÆľÇÀ» À§ÇÑ ¸Ó½Å ·¯´× ±â¹ýÀÇ ÀÀ¿ë," 2013 Çѱ¹CAD/CAMÇÐȸ Çмú´ëȸ ³í¹®Áý, P-17, pp.-, 2013.8

59.   À±¼¼¿ø, ÀÌ»óÇå, ¾çÁöÇö, "¿îÀü´ë »óÀÇ Á¦½ºÃ³¸¦ ¹ÙÅÁÀ¸·Î ÇÑ ¿îÀüÀÚ ÀÎÅÍÆäÀ̽º °³¹ß," 2013 Çѱ¹CAD/CAMÇÐȸ Çмú´ëȸ ³í¹®Áý, P-18, pp.-, 2013.8

60.   À±¼¼¿ø, ½ÉÁö¼º, ¾È´ë·æ, ÀÌ»óÇå,"ÅÍÄ¡ ±Û·¯ºê¸¦ ÀÌ¿ëÇÑ ¿îÀüÀÚ ÀÎÅÍÆäÀ̽ºÀÇ ÁÖÀÇ ºÐ»êÀÇ Á¤·®Àû ºñ±³ Æò°¡," 2013 Çѱ¹CAD/CAMÇÐȸ Çмú´ëȸ ³í¹®Áý, pp.692-693, 2013.1

61.   À±¼¼¿ø, ½ÉÁö¼º, ÀÌ»óÇå, "Á¢ÃË½Ä µ¥ÀÌÅÍ ±Û·¯ºê¸¦ ÀÌ¿ëÇÑ ¿îÀüÀÚ ÀÎÅÍÆäÀ̽ºÀÇ ¿îÀüÀÚ ÁÖÀÇ ºÐ»ê," 2013 HCI ±¹Á¦Çмú´ëȸ ³í¹®Áý, pp.109-112, 2013.1

62.   ½ÉÁö¼º, À±¼¼¿ø, ÀÌ»óÇå, "µ¿ÀÛÀνÄÀåÄ¡À» ÀÌ¿ëÇÑ Àΰ£-Â÷·® ÀÎÅÍÆäÀ̽ºÀÇ ¿îÀüÀÚ ÁÖÀÇ ºÐ»ê," 2012 Çѱ¹CAD/CAMÇÐȸ Çмú´ëȸ ³í¹®Áý, pp.800-802, 2012.8

63.   ÀÌ»óÇå, "Ư¡Çü»ó ¸ðµ¨¸µ ¿¬ÇõÀ» ¹ÙÅÁÀ¸·Î ÇÑ ¼±ÅÃÀû ÁýÇÕ ¿¬»ê," 2011 Çѱ¹ÄÄÇ»ÅÍ Á¾ÇÕÇмú´ëȸ ³í¹®Áý, pp.280-281, 2011.7

64.   ½ÉÁö¼º, ÃÖ³²Ã¶, ÀÌ»óÇü, ÀÌ»óÇå, "A Study on Driver Information Display System to Improve Focused Attention," 2011 ´ëÇÑÀΰ£°øÇÐȸ Ãá°èÇмú´ëȸ ³í¹®Áý, P.1.4, 2011.5

65.   ÃÖ³²Ã¶, ½ÉÁö¼º, ÀÌ»óÇü, À̱Ɽ, ÀÌ»óÇå,"Æ®·° ¹ßÆÇÀÇ ¼³°è ¹× ½ÂÇÏÂ÷ ºÒÆíµµ Æò°¡," 2011 Çѱ¹ÀÚµ¿Â÷°øÇÐȸ ºÎ¹®Á¾ÇÕ Çмú´ëȸ ³í¹®Áý, pp.280-281, 2011.5

66.   ÃÖ³²Ã¶, ½ÉÁö¼º, ÀÌ»óÇü, À̱Ɽ, ÀÌ»óÇå, "¾ÈÀüÇÑ Æ®·°½ÂÇÏÂ÷¸¦ À§ÇÑ ºÒÆíµµ Æò°¡¿¬±¸," 2011 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ ³í¹®Áý, pp.623-627, 2011.1

67.   ÃÖ³²Ã¶, ½ÉÁö¼º, À̱Ɽ, ÀÌ»óÇå, "»ýü¿ªÇÐÀûÀÎ Çؼ®À» ¹ÙÅÁÀ¸·Î ÇÑ Æ®·°½ÂÇÏÂ÷ µ¿ÀÛÀÇ ºÒÆíµµ Æò°¡," 2010 ´ëÇÑÀΰ£°øÇÐȸ Ãß°èÇмú´ëȸ, pp. 298-301, 2010.10

68.   ÃÖ³²Ã¶, ½ÉÁö¼º, À̱Ɽ, ÀÌ»óÇå, "Æ®·° ¹ßÆÇÀÇ ºÒÆíµµ Æò°¡ ¹× °³¼±¿¡ °üÇÑ ¿¬±¸," 2010 ´ëÇÑÀΰ£°øÇÐȸ Ãá°èÇмú´ëȸ, P.7, 2010.5

69.   ÃÖ³²Ã¶, ÀÌ»ó¹¬, ½ÉÁö¼º, ±è»ó¹Î, À̱Ɽ, ÀÌ»óÇå, "Àΰ£°øÇÐÀûÀÎ Æ®·° ¹ßÆÇÀÇ ¼³°è ¹× Çؼ®", 2010 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ ³í¹®Áý, pp.377-382, 2010.2

70.   ±è¼ºÈÆ, ¹Î½ÂÀç(ÇѾç´ëÇб³), ÀÌ»óÇå(±¹¹Î´ëÇб³), "À§»óÃÖÀû¼³°è °á°ú¸¦ ÀÌ¿ëÇÑ CAD ÀÎÅÍÆäÀ̽º", 2010 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ ³í¹®Áý, pp.263-271, 2010.2

71.   ÀÌ»ó¹¬, ±èÀçÈ£, ÃÖ³²Ã¶, ÀÌ»óÇå, "ÀÎü¿Í Á¦Ç°ÀÇ ÅëÇÕ °¡»ó¼³°è ÇÁ·¹ÀÓ¿÷ÀÇ °³¹ß", 2009 Çѱ¹ÀÚµ¿Â÷°øÇÐȸ Çмú´ëȸ, pp.2179-2185, 2009.11

72.   ±èÁ¾¿Ï, ÀÌ»óÇå, "Á¦Ç° ¹× ÀÎüÀÇ ÅëÇÕ CAD ½Ã½ºÅÛÀ» À§ÇÑ µðÁöÅÐ ÀÎü ¸ðµ¨ÀÇ »ý¼º¿¡ °üÇÑ ¿¬±¸", 2009 ´ëÇÑ Àΰ£°øÇÐȸ Ãß°èÇмú´ëȸ ³í¹®Áý, P_2, 2009.11

73.   ÀÌ°æ¹Î, ÀÌ»óÇå, "Àΰ£°øÇÐÀûÀÎ Çлý¿ë ÀÇÀÚ¿¡ °üÇÑ ¿¬±¸", 2009 ´ëÇÑ Àΰ£°øÇÐȸ Ãß°èÇмú´ëȸ ³í¹®Áý, P_1, 2009.11

74.   ±èÀçÈ£, ÀÌ»ó¹¬, °ø¼¼Áø, ÀÌ»óÇå, ¡°Á¤·®ÀûÀÎ ½ÂÇÏÂ÷ ºÒÆíµµ Æò°¡ ¸ðµ¨¿¡ °üÇÑ ¿¬±¸,¡± 2009 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ ³í¹®Áý, pp.554-559, 2009.2

75.   ±èÀçÈ£, ÀÌ»ó¹¬, ÀÌ»óÇå, ¡°»ýü¿ªÇÐÀû Çؼ® ¹× Æò°¡¸¦ ÀÌ¿ëÇÑ ½Â¿ëÂ÷ µµ¾î ½Ã½ºÅÛÀÇ Àΰ£°øÇÐÀûÀÎ ¼³°è,¡± ´ëÇÑÀΰ£°øÇÐȸ Çмú´ëȸ ³í¹®Áý, 2008.11.

76.   ÀÌ»óÇå, ±è»ïÁø, ÀÌ¿µ¹Î, ¾çÁø¿ì, ¡°Unigraphics±â¹Ý Â÷ü Á¶¸³¿ë Áö±× ¼³°è Áö¿ø CAD ½Ã½ºÅÛ °³¹ß,¡± 2008 ÀÚµ¿Â÷°øÇÐȸ »ý»ê±â¼úºÎ¹® ¿öÅ©¼ó ³í¹®Áý, 2008.9.18.

77.   ÀÌÁøÈ­, ±¸Çý¹Ì, ÀÌ»óÇå, ¡°¹ö½º ÁÖÇà ½Ã Á¹°íÀÖ´Â ½Â°´ÀÇ ¸ñ¿¡ ´ëÇÑ »ýü¿ªÇÐÀûÀÎ Çؼ®,¡± 2008 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ ³í¹®Áý, pp.748-752, 2008.1

78.   ÀÌÁøÈ­, ±èÀçÈ£, ÀÌ»ó¹¬, ÀÌ»óÇå, ¡°½ÂÇÏÂ÷ ÆíÀǸ¦ À§ÇÑ ÀÚµ¿Â÷ µµ¾î ¼³°è ¹× ÀÎü µ¿ÀÛ Çؼ®,¡± 2008 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ ³í¹®Áý, pp.905-910, 2008.1

79.   ±èÀçÈ£, ÀÌÁøÈ­, ÀÌ»ó¹¬, °ø¼¼Áø, ÀÌ»óÇå, ¡°½ÂÇÏÂ÷¸¦ °í·ÁÇÑ ½Â¿ëÂ÷ µµ¾îÀÇ Àΰ£°øÇÐÀûÀÎ ¼³°è,¡± Çѱ¹ÀÚµ¿Â÷°øÇÐȸ 2007³âµµ Ãß°èÇмú´ëȸ ³í¹®Áý, Á¦3±Ç, pp.1407-1412, 2007.11

80.   ±èÀçÈ£, ÀÌÁøÈ­, ÀÌ»ó¹¬, °ø¼¼Áø, ÀÌ»óÇå ¡°Æ®·°¹ßÆÇÀÇ Àΰ£°øÇÐÀûÀÎ ¼³°è ¹× »ýü¿ªÇÐ ½Ã¹Ä·¹À̼Ç,¡± ´ëÇÑÀΰ£°øÇÐȸ Çмú´ëȸ ³í¹®Áý, pp.531-536, 2007.11

81.   ÀÌÁøÈ­, ±èÀçÈ£, ÀÌ»ó¹¬, °ø¼¼Áø, ÀÌ»óÇå, ¡°»ýü¿ªÇÐ Çؼ®À» ÀÌ¿ëÇÑ ½Â¿ëÂ÷µµ¾îÀÇ Àΰ£°øÇÐÀûÀÎ ¼³°è,¡± Çѱ¹Á¤¹Ð°øÇÐȸ 2007³âµµ Ãß°èÇмú´ëȸ ³í¹®Áý, pp.165-166, 2007.11

82.   ȲÀιü, ÀÌ»óÇå, ¡°Knowledge FusionÀ» ÀÌ¿ëÇÑ Áö½Ä±â¹Ý ±ÝÇü¼³°è ½Ã½ºÅÛÀÇ °³¹ß,¡± Çѱ¹Á¤¹Ð°øÇÐȸ 2007³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý, pp.787-788, 2007.6

83.   ±èÀçÈ£, ÀÌÇѼö, ÀÌÁøÈ­, ±è¼º¿ø, ¹ÚÇö±â, ÀÌ»óÇå, ¡°½Â¿ëÂ÷ µµ¾îÀÇ Àΰ£°øÇÐÀûÀÎ ¼³°è ¹× »ýü¿ªÇÐ ½Ã¹Ä·¹À̼Ç,¡± Çѱ¹Á¤¹Ð°øÇÐȸ 2007³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý, pp.587-588, 2007.6

84.   ÀÌ»óÇå, ¡°Á¦Ç°¼³°è¿Í º´ÇàÇϴ Ư¡ Çü»ó±â¹Ý CAD ¸ðµ¨ÀÇ ´ÙÁßÇØ»óµµ ¸ðµ¨¸µ,¡± 2007 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ ³í¹®Áý, pp.848-853, 2007.2

85.   ȲÀιü, ÀÌ»óÇå, ¡°Knowledge FusionÀ» ÀÌ¿ëÇÑ Áö´ÉÇü »çÃâ±ÝÇü ¼³°è ½Ã½ºÅÛ,¡± 2007 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ ³í¹®Áý, pp.748-752, 2007.2

86.   ÀÌ»óÈ­, ȲÀιü, ÀÌ»óÇå ¡°Â÷ü ÆÐ³Î¿ë µå·Î¿ì ±ÝÇü ¼³°è¸¦ À§ÇÑ CAD ½Ã½ºÅÛÀÇ °³¹ß,¡± Çѱ¹ÀÚµ¿Â÷°øÇÐȸ 2006³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý, pp.2063-2068, 2006.6

87.   ±è¿ë¹Î, ÀÌ»óÇå, ÀÌ°Ç¿ì, ¡°3Â÷¿ø ±ÝÇü ¼³°è¸¦ À§ÇÑ ¿É¼Â ¹× ¼±Á÷ °î¸é ¸ðµ¨¸µ ¹æ¹ý °³¹ß,¡± Çѱ¹ÀÚµ¿Â÷°øÇÐȸ 2006³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý, pp.1963-1967, 2006.6

88.   ½Åµ¿Æò, ÀÌ»óÇå, ÀÌ°Ç¿ì, ¡°±ÝÇü¼³°è ½Ã½ºÅÛÀ» À§ÇÑ ÀÇ»ç ¼Ö¸®µå ¸ðµ¨ÀÇ ºÒ¸®¾ð ÀÛ¾÷ °³¹ß,¡± Çѱ¹ÀÚµ¿Â÷°øÇÐȸ 2006³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý, pp.2069-2075, 2006.6

89.   ÀÌ»óÇå, ¡°Æ¯Â¡Çü»ó±â¹Ý ´ÙÁß Ãà¾àµµ ºñ´Ù¾çü ¸ðµ¨¸µ ±â¹ýÀ» ÀÌ¿ëÇÑ CAD-CAEÅëÇÕ,¡± 2006 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ ³í¹®Áý, pp.364-372, 2006.2

90.   À̼±Ã¶, ÀÌ»óÇå, ¿°Ã¢·Ä, ¡°3Â÷¿ø Áö±×¼³°è ½Ã½ºÅÛÀÇ °³¹ß-Part1: ¼³°è ¹× °ËÁõ Áö¿ø ±â´É,¡± 2006 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ ³í¹®Áý, pp.832-837, 2006.2

91.   Á¤¿¬°æ, ÀÌ»óÇå, ¿°Ã¢·Ä, ¡°3Â÷¿ø Áö±×¼³°è ½Ã½ºÅÛÀÇ °³¹ß-Part2: µµ¸éÀÛ¼º ¹× Á¦ÀÛ Áö¿ø±â´É,¡± 2006 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ ³í¹®Áý, pp.736-742, 2006.2

92.   ÀÌ»óÈ­, ÀÌ»óÇå, ¡°ÀÚµ¿Â÷ ÆгΠµå·ÎÀ× ±ÝÇü¼³°è¸¦ À§ÇÑ 3Â÷¿ø CAD½Ã½ºÅÛÀÇ °³¹ß,¡± Çѱ¹Á¤¹Ð°øÇÐȸ 2005³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý, pp.1424-1428, 2005.6

93.   ÀÌ»óÇå, À̱Կ­, ¡°Æ¯Â¡ Çü»ó±â¹Ý ´ÙÁß ÇØ»óµµ ¸ðµ¨¸µÀÇ »ó¼¼¼öÁØ °áÁ¤±âÁØ¿¡ °üÇÑ ¿¬±¸,¡± Çѱ¹Á¤¹Ð°øÇÐȸ 2005³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý, pp.828-831, 2005.6

94.   ÀÌ»óÇå, À̱Կ­, ¡°Æ¯Â¡Çü»ó±â¹Ý ¼Ö¸®µå ¸ðµ¨¿¡ ´ëÇÑ ´ÙÁßÇØ»óµµ ¸ðµ¨¸µ ±â¹ý,¡± 2005 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ³í¹®Áý, pp.813-821, 2005.1

95.   ÀÌ»óÈ­, ÀÌ»óÇå, À¯½Â¿ì, ¡°ÀÚµ¿Â÷¿ë ¿ÜÆÇ ±ÝÇü ¼³°è¸¦ À§ÇÑ 3Â÷¿ø ¼³°è Áö¿ø ½Ã½ºÅÛÀÇ °³¹ß,¡± 2005 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ³í¹®Áý, pp.709-714, 2005.1

96.   Á¤¿¬°æ, ÀÌ»óÇå, ¿°Ã¢·Ä, ¡°3Â÷¿ø Áö±× ¼³°è Áö¿ø ½Ã½ºÅÛÀÇ °³¹ß,¡± 2005 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ³í¹®Áý, pp.515-519, 2005.1

97.   ¹Ú»ó±Ù, ÀÌ»óÇå, ¡°°£°áÇÏ°í È¿À²ÀûÀÎ Æú¸®°ï ¸Þ½¬ÀÇ Ç¥Çö ±¸Á¶,¡± 2005 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ³í¹®Áý, pp.325-337, 2005.1

98.   ±è¼®·Ä, ÀÌ»óÇå, Á¤¿¬°æ, ÀÌ»óÈ­, ±èÇüÁØ, ¡°3Â÷¿ø Áö±× ¼³°è¸¦ À§ÇÑ ºÎÇ° ¶óÀ̺귯¸® ±¸Ãà ¹× µµ¸é ÀÛ¼º ÆíÀÇ ±â´ÉÀÇ °³¹ß¡±, 2004 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ³í¹®Áý, pp.565-574, 2004.2.12-14

99.   Ç㵿ÁØ, ÀÌ»óÇå, ¡°3Â÷¿ø ±ÝÇü¼³°è¸¦ À§ÇÑ °î¸é ¿É¼Â ±â´É °³¹ß¡±, Çѱ¹Á¤¹Ð°øÇÐȸ 2003³âµµ Ãß°èÇмú´ëȸ ³í¹®Áý, KSPE 03F168, pp.220-220, 2003.10.17-18

100. ±è¼º·Ä, ÀÓ¼º¶ô, ÀÌ»óÇå, ¡°Áö½Ä ±â¹Ý °øÇÐ ½Ã½ºÅÛÀ» ÀÌ¿ëÇÑ »çÃâ ±ÝÇüÀÇ ¸ôµåº£À̽º ¼³°è¡±, Çѱ¹Á¤¹Ð°øÇÐȸ 2003³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý, KSPE 03S345, pp.1467-1470, 2003.6.12-13

101. ÀåÁø¿ì, ÀÌ»óÇå, ÀÓ¼º¶ô, ¡°ÀÇ»ç ¼Ö¸®µå ¸ðµ¨ÀÇ Ä³ºñƼ ¹× ÄÚ¾îÆÇ »ý¼º¡±, Çѱ¹Á¤¹Ð°øÇÐȸ 2003³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý, KSPE 03S378, pp.1601-1604, 2003.6.12-13

102. Á¶º´Ã¶, ÀÌ»óÇå, ¡°Â÷üÁ¶¸³¿ë 3Â÷¿ø Áö±× ¼³°è ½Ã½ºÅÛ¿¡¼­ÀÇ ½Ç¸°´õ ¹× º£À̽º ¼³°è ÇÁ·Î±×·¥ °³¹ß¡±, Çѱ¹Á¤¹Ð°øÇÐȸ 2003³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý, KSPE 03S347, pp.1475-1478, 2003.6.12-13

103. Á¤Å¿µ, ÀÌ»óÇå, ¡± CAD/CAM/CAE/PDM ½Ã½ºÅÛÀ» ÀÌ¿ëÇÑ F-125Â÷·®ÀÇ °³¹ß (5): DMU ±¸Ãà È°¿ë ¹× Â÷·® Á¦ÀÛ¡±, Çѱ¹ÀÚµ¿Â÷°øÇÐȸ 2003³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý, KSAE03-S0190, pp.1195-1200, 2003.5.22-24

104. ÃÖ¿Ï, ÀÌ»óÇå, ¡°CAD/CAM/CAE/PDM ½Ã½ºÅÛÀ» ÀÌ¿ëÇÑ F-125Â÷·®ÀÇ °³¹ß (4): ÆÄ¿öÆ®·¹ÀÎ ½Ã½ºÅÛÀÇ ¼³°è¡±, Çѱ¹ÀÚµ¿Â÷°øÇÐȸ 2003³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý, KSAE03-S0189, pp.1190-1194, 2003.5.22-24

105. ¹ÚÁø±¹, ÀÌ»óÇå, ±è»ó¼·, ¡°CAD/CAM/CAE/PDM ½Ã½ºÅÛÀ» ÀÌ¿ëÇÑ F-125Â÷·®ÀÇ °³¹ß (3): Çö°¡ ¹× Á¶Çâ ÀåÄ¡ÀÇ ¼³°è¡±, Çѱ¹ÀÚµ¿Â÷°øÇÐȸ 2003³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý, KSAE03-S0188, pp.1183-1189, 2003.5.22-24

106. Á¤¸í½Ä, ÀÌ»óÇå, ¡°CAD/CAM/CAE/PDM ½Ã½ºÅÛÀ» ÀÌ¿ëÇÑ F-125Â÷·®ÀÇ °³¹ß (2): ¾ÈÀü ¹× °æ·®È­¸¦ À§ÇÑ ÇÁ·¹ÀÓ ¼³°è ¹× Çؼ®¡±, Çѱ¹ÀÚµ¿Â÷°øÇÐȸ 2003³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý, KSAE03-S0187, pp.1177-1182, 2003.5.22-24

107. ÀÌÇØö, ÀÌ»óÇå, ¡°CAD/CAM/CAE/PDM ½Ã½ºÅÛÀ» ÀÌ¿ëÇÑ F-125Â÷·®ÀÇ °³¹ß (1): Á¦Ç° ±âȹ ¹× PDM ½Ã½ºÅÛ ±¸Ãࡱ, Çѱ¹ÀÚµ¿Â÷°øÇÐȸ 2003³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý, KSAE03-S0186, pp.1171-1176, 2003.5.22-24

108. ÀÌ»óÇå, ¡°3D PLM ½Ã½ºÅÛÀ» ÀÌ¿ëÇÑ F-125 ÀÚÀÛ ÀÚµ¿Â÷ÀÇ °³¹ß¡±, Çѱ¹ÀÚµ¿Â÷°øÇÐȸ 2003³âµµ Ãá°èÇмú´ëȸ³í¹®Áý, KSAE03-S0184, pp.1158-1164, 2003.5.22-24

109. ÀÌ»óÇå, ÀåÁø¿ì, ¿ìÀ±È¯, ¡°KMU-MOLD: Unigraphics±â¹Ý ¼Ö¸®µå »çÃâ±ÝÇü ¼³°è ½Ã½ºÅÛ¡±, 2003 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ ³í¹®Áý, pp.421-426, 2003.2.7

110. ÀÌ»óÇå, ¿ìÀ±È¯, ¡°CAD/CAE/PDM ½Ã½ºÅÛÀ» ÀÌ¿ëÇÑ F-125 Â÷·®ÀÇ °³¹ß¡±, 2003 CAD/CAMÇÐȸ Çмú¹ßǥȸ, pp.347-351, 2003.2.7

111. ±è°æ¹ü, ÀÌ»óÇå, ¿ìÀ±È¯, ȲÁø°ý, ¡°±×·¡ÇÈ Çϵå¿þ¾î¸¦ ÀÌ¿ëÇÑ 3Â÷¿ø ¿É¼Â°¡°øÀÇ NC°ø±¸ °æ·Î »ý¼º¿¡ °üÇÑ ¿¬±¸¡±, ±â°èÀÇ ³¯ ¼±Æ÷ ¹× 2002³âµµ ±â°è°ü·Ã »êÇп¬ ¿¬ÇÕ ½ÉÆ÷Áö¾ö °­¿¬ ¹× ³í¹®Áý(´ëÇѱâ°èÇÐȸÆí), pp.1106-1111, 2002.11.13-14

112. ÁÖÀº´ö, õÀç½Â, ¼ÛÀÏÇå, ±è¼ö¿ë, ÀÓ¿ëÅÃ, ÀÌ°­¼ö, ¹Ú¼º±Õ, ÀÌ»óÇå, ¡°CAMPform2D¸¦ »ç¿ëÇÑ ´ÜÁ¶ °øÁ¶ Çؼ®, ±â°èÀÇ ³¯ ¼±Æ÷ ¹× 2002³âµµ ±â°è°ü·Ã »êÇп¬ ¿¬ÇÕ½ÉÆ÷Áö¾ö °­¿¬ ¹× ³í¹®Áý(´ëÇѱâ°èÇÐȸÆí), pp.2576-2581, 2002.11.13-14

113. Á¶º´Ã¶, ÀÌ»óÇå, ¿ìÀ±È¯, ¡°Â÷ü Á¶¸³¿ë 3Â÷¿ø Áö±× ¼³°è ½Ã½ºÅÛ °³¹ß¡±, ±â°èÀÇ ³¯ ¼±Æ÷ ¹× 2002³âµµ ±â°è°ü·Ã »êÇп¬ ¿¬ÇÕ½ÉÆ÷Áö¾ö °­¿¬ ¹× ³í¹®Áý(´ëÇѱâ°èÇÐȸÆí), pp.1299-1304, 2002.11.13-14

114. ±è¼®·Ä, ÀåÁø¿ì, ÀÌ»óÇå, ¿ìÀ±È¯, ÀÌ°­¼ö, Ç㿵¼ö, ¾çÁø¼®, ¹è±ÔÇü, ±è¼ºÀÏ, ¡°»çÃâ±ÝÇüÀÇ ¾ð´õÄÆ Ã³¸®±â±¸ 3Â÷¿ø ¼³°è¡±, Çѱ¹Á¤¹Ð°øÇÐȸ 2002³âµµ Ãß°èÇмú´ëȸ³í¹®Áý, KSPE 02F225, pp.929-932, 2002.10.18-19

115. ±è°æ¹ü, ÀÌ»óÇå, ¿ìÀ±È¯, ¡°±×·¡ÇÈ Çϵå¿þ¾î¸¦ ÀÌ¿ëÇÑ NC °¡°ø °ËÁõÀÇ °í¼ÓÈ­¡±, Çѱ¹Á¤¹Ð°øÇÐȸ 2002³âµµ Ãß°èÇмú´ëȸ ³í¹®Áý, KSPE 02F175, pp.616-619, 2002.10.18-19

116. ÀåÁø¿ì, ÀÓ¼º¶ô, ±è¼®·Ä, ÀÌ»óÇå, ¿ìÀ±È¯, ÀÌ°­¼ö, Ç㿵¹«, ¾çÁø¼®, ¹è±ÔÇü, ¡°¼³°è °úÁ¤ ¸ðµ¨¸µ ±â¹ýÀ» Àû¿ëÇÑ ±ÝÇü ¼³°è¡±, Çѱ¹Á¤¹Ð°øÇÐȸ 2002³âµµ Ãß°èÇмú´ëȸ ³í¹®Áý, KSPE 02F231, pp.954-957, 2002.10.18-19

117. ÀÌ»óÇå, ÀÌ°­¼ö, ¹Ú»ó±Ù,"±³È¯¹ýÄ¢À» ¸¸Á·ÇÏ´Â ºñ´Ù¾çü ¸ðµ¨ÀÇ ¼±ÅÃÀû ºÒ¸®¾È ÀÛ¾÷ÀÇ °³¹ß", Çѱ¹Á¤¹Ð°øÇÐȸ 2002³âµµ Ãá°èÇмú´ëȸ³í¹®Áý, KSPE 02S180, pp.836-839, 2002.5.17-18

118. ÀÌ»óÇå, ÀÌ°­¼ö, ¹Ú»ó±Ù,"¼±ÅÃÀû ºÒ¸®¾È ¿¬»êÀÚ¸¦ ÀÌ¿ëÇÑ ¼Ö¸®µå ¸ðµ¨ÀÇ ´ÙÁßÇØ»óµµ ±¸Çö", Çѱ¹Á¤¹Ð°øÇÐȸ 2002³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý, KSPE 02S179, pp.833-835, 2002.5.17-18

119. ÀåÁø¿ì, ÀÌ»óÇå, ÀÌ°­¼ö, ¹Ú»ó±Ù, Ç㿵¹«, ¾çÁø¼®"ÀÇ»ç ¼Ö¸®µå ¸ðµ¨ÀÇ Àý´Ü ¹× ºÒ¸®¾È ÀÛ¾÷ °³¹ß", Çѱ¹Á¤¹Ð°øÇÐȸ 2002³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý, KSPE 02S151, pp.715-718, 2002.5.17-18

120. ÀÌ»óÇå, ±èâÁØ, Á¶º´Ã¶, ÀÌ°­¼ö, ¾çÁø¼®, Ç㿵¹«,"»çÃâ ±ÝÇü¿¡¼­ÀÇ ¼Ö¸®µå ¸ðµ¨·¯ ±â¹Ý ·±³Ê ¹× °ÔÀÌÆ® ¼³°è ½Ã½ºÅÛ °³¹ß", Çѱ¹Á¤¹Ð°øÇÐȸ 2001³âµµ Ãß°èÇмú´ëȸ ³í¹®Áý, KSPE 01F176, pp.716-719, 2001.10.26-27

121. ÀÌ»óÇå, ±è°æ¹ü, ÀåÁø¿ì, ÀÌ°­¼ö, Ç㿵¹«, ¾çÁø¼®,"¼Ö¸®µå ¸ðµ¨¸µ ±â¹Ý »çÃâ±ÝÇü ¼³°èÀü¿ë CAD ½Ã½ºÅÛÀÇ °³¹ß", Á¦9ȸ ÷´Ü»ý»ê½Ã½ºÅÛ Workshop, pp.43-50, 2001.9.6-7

122. ÀÌ»óÇå, ÀÌ°­¼ö, ±è°æ¹ü, ±èâÁØ, ÀåÁø¿ì, ±è¼ºÂù, ±è½Â¿±, Ç㿵¹«, ¾çÁø¼®,"Unigraphics±â¹Ý »çÃâ±ÝÇü ¼³°èÀü¿ë CAD½Ã½ºÅÛÀÇ °³¹ß", ´ëÇѱâ°èÇÐȸ 2001³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý C, KSME 01S325, pp.257-262, 2001.6.28-29

123. ÀÌ°­¼ö, ÀÌ»óÇå, ÀÎÁ¤Á¦,"½ºÅÆÇÎ ±ÝÇüÀÇ ¶ó¿îµù Çü»ó ÃÖÀûÈ­¸¦ À§ÇÑ CAD/CAE ¸ðµ¨ ÀÚµ¿»ý¼º", ´ëÇѱâ°èÇÐȸ 2001³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý C, KSME 01S317, pp. 269-274, 2001.6.28-29

124. ÀÌ°­¼ö , ÀÌ°Ç»ó , ÀÌ»óÇå , ±èÂù¹¬ , ±è»ó¼· , Çã½ÂÁø,"ÅëÇÕ Àü»ê ȯ°æÇÏ¿¡¼­ÀÇ Á¦Ç° °³¹ß", 2001 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ ³í¹®Áý, pp. 345-350, 2001.2.9

125. ÀÌ¿ø°æ, ÀÌ»óÇå,"½© ¸Þ½¬ ¸ðµ¨ÀÇ ¸ð¼­¸® ¶ó¿îµå Ž»ö ¹× ¼öÁ¤ ±â´É", Çѱ¹Á¤¹Ð°øÇÐȸ 2000³âµµ Ãß°èÇмú´ëȸ ³í¹®Áý, KSPE 00F142, pp.624-627, 2000.10.28

126. ÀÌ»óÇå, ±èÇö¼ö,"ºñ´Ù¾çü ¿É¼Â±â´ÉÀ» ÀÌ¿ëÇÑ ¾ãÀº µÎ²²ÀÇ ¼Ö¸®µåÀÇ È¿À²ÀûÀÎ ¸ðµ¨¸µ ¹æ¹ý", 2000 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ ³í¹®Áý, pp.137-142, 2000.2.11

127. ÁÖ¼º¿í, ÀÌ»óÇå, ±èÇö¼ö, ¹Ú±âÇö,"È¿À²ÀûÀÎ NC ¹Ð¸µ ½Ã¹Ä·¹À̼ÇÀ» À§ÇÑ »ï°¢Çü ¸Þ½¬ °¨¼Ò ¾Ë°í¸®ÁòÀÇ °³¹ß", Çѱ¹Á¤¹Ð°øÇÐȸ 1999³âµµ Ãß°èÇмú´ëȸ ³í¹®Áý, pp.1287-1291, 1999.11.19-20

128. ÀÌ¿ø°æ, ÀÌ»óÇå,"À¯ÇÑ¿ä¼Ò¸ðµ¨ÀÇ ¸ð¼­¸® ¶ó¿îµù ±â´É °³¹ß", Çѱ¹Á¤¹Ð°øÇÐȸ 1999³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý, pp.523-527, 1999.5.15

129. ÀÌ»óÇå,"´Ü¼øÇÑ Çü»óÀÇ ºñ´Ù¾çü ¸ðµ¨¿¡ ´ëÇÑ ¿É¼Â ±â´É °³¹ß", ´ëÇѱâ°èÇÐȸ 1999³âµµ Ãá°èÇмú´ëȸ ³í¹®Áý, KSME 99S061, pp.393-398, 1999.4.22-24

130. ÀÌ¿ø°æ, ÀÌ»óÇå, ÀÎÁ¤Á¦,"½ºÅÆÇÎ ±ÝÇü ¼³°è ¹× Çؼ®À» À§ÇÑ À¯ÇÑ ¿ä¼Ò ¶ó¿îµù ±â´É °³¹ß", ´ëÇѱâ°èÇÐȸ 1998³âµµ Ãß°èÇмú´ëȸ ³í¹®Áý, KSME 98F194, pp.1151-1157, 1998.11.6

131. ÀÌ»óÇå, ÀÌ°Ç¿ì,"ºñ´Ù¾çü À§»ó Ç¥ÇöÀ» ¹ÙÅÁÀ¸·ÎÇÑ ¹ÚÆÇ Çü»ó ¸ðµ¨¸µ ½Ã½ºÅÛÀÇ °³¹ß", 1997 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ ³í¹®Áý, pp.277-282, 1997.2.14

132. ÀÌ°­¼ö, ÀÌ°Ç¿ì, ÇÑ¿µÇö, È«Áø¿õ, ¹Ú»ó±Ù, ÇãÁ¤ÈÆ, ¾ÈÀçÈ«, ÀÌ°æÁø, °û¼ºÁØ, ±è¼ºÈ¯, ÀÌ»óÇå, ±è¿µÁø, Á¤ÁøÆò,"ºñ´Ù¾çü ¸ðµ¨À» Áö¿øÇÏ´Â °³¹æÇü Ä¿³Î ½Ã½ºÅÛÀÇ °³¹ß", 1997 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ ³í¹®Áý, pp.26-33, 1997.2.14

133. ÀÌ»óÇå, ÀÌ°Ç¿ì, ¡°ºñ´Ù¾çü ¸ðµ¨·¯¸¦ ÀÌ¿ëÇÑ »çÃâ ¼ºÇü¿ë CAD ¹× CAE ½Ã½ºÅÛÀÇ ÅëÇÕ¡±, 1996 Çѱ¹CAD/CAMÇÐȸ Çмú¹ßǥȸ ³í¹®Áý, pp.125-130, 1996.2.13

 

 

 

Àú¼­

 

1.     ±è¼ºÈ¯ , ±è¿µÀÏ , ¹Ú»óÈ£ , ¹ÚÁ¾Ãµ , ÀÌ»óÇå , Á¤À¶È£ , Á¶°æÈ£ °ø¿ª , Kunwoo Lee Àú , ¡°CAD/CAM/CAE ½Ã½ºÅÛ ¡±, ÇǾ ¿¡µàÄÉÀÌ¼Ç ÄÚ¸®¾Æ . 2000. 3. 5

 

 

±³³» ³í¹®Áý

 

1.     À̼±Ã¶ , ÀÌ»óÇå , ¡° Â÷ü ¿ëÁ¢ Áö±× ½Ã½ºÅÛÀÇ °¡»ó°ËÁõ ±â´ÉÀÇ °³¹ß ¡±, ±¹¹Î´ëÇб³ °øÇбâ¼ú ³í¹®Áý , Á¦30 Áý , pp.187-192, 2008.2

2.     À̼±Ã¶ , ÀÌ»óÇå , ¡° Â÷ü ¿ëÁ¢¿ë Áö±×ÀÇ °¡»ó °ËÁõ ½Ã½ºÅÛ ¡±, ±¹¹Î´ëÇб³ °øÇбâ¼ú ³í¹®Áý , Á¦29 Áý , pp.255-258, 2007.2

3.     ±è¼®·Ä , ÀÌ»óÇå , ¡°3 Â÷¿ø Áö±× ¼³°è ½Ã½ºÅÛÀÇ µµ¸é ÀÛ¼º Áö¿ø ±â´ÉÀÇ °³¹ß ¡±, ±¹¹Î´ëÇб³ °øÇбâ¼ú ³í¹®Áý , Á¦27 Áý , pp.105-114, 2005.2

4.     ÀÌ»óÇå , ¡° »çÃâ ±ÝÇü ³Ã°¢½Ã½ºÅÛÀÇ 3 Â÷¿ø ¼³°èÁö¿ø±â´ÉÀÇ °³¹ß ¡±, ±¹¹Î´ëÇб³ °øÇбâ¼ú ³í¹®Áý , Á¦26 Áý , pp.349-354, 2004.2

5.     ÀåÁø¿ì , ÀÌ»óÇå ,"»çÃâ ±ÝÇüÀÇ Ä³ºñƼ ÆÇÀÇ ¼Ö¸®µå ¸ðµ¨ »ý¼º¿¡ °üÇÑ ¿¬±¸", ±¹¹Î´ëÇб³ °øÇбâ¼ú ³í¹®Áý , Á¦24±Ç , pp.411-416, 2002.2.

6.     ÀÌ»óÇå ," 2 Â÷¿ø CAD ¸ðµ¨ÀÇ ¿É¼Â ±â´ÉÀ» ÀÌ¿ëÇÑ ¼¼ºÎ Çü»ó Ž»ö ¹× Á¦°Å ¹æ¹ý¿¡ °üÇÑ ¿¬±¸", ±¹¹Î´ëÇб³ °øÇбâ¼ú ³í¹®Áý , Á¦23±Ç , pp.413-419, 2001.2.

7.     ÁÖ¼º¿í , ÀÌ»óÇå , ¡°Z-map °î¸éÀÇ ½Å¼ÓÇÑ ·»´õ¸µÀ» À§ÇÑ ´Ù°¢Çü °¨Ãà ¾Ë°í¸®ÁòÀÇ °³¹ß ¡±, ±¹¹Î´ëÇб³ °øÇбâ¼ú ³í¹®Áý , Á¦22±Ç , pp.451-456, 2000.2.

8.     ÀÌ¿ø°æ , ÀÌ»óÇå ,"3 Â÷¿ø ÃøÁ¤Á¡ µé·ÎºÎÅÍ µ¿ÀÏ¹Ý°æ ¸ð¼­¸® ¶ó¿îµå Ư¡ Çü»ó ÃßÃâ¿¡ °üÇÑ ¿¬±¸", ±¹¹Î´ëÇб³ °øÇбâ¼ú ³í¹®Áý , Á¦21±Ç , pp.431-440, 1999.2.

9.     ÀÌ»óÇå ,"°æ°è Ç¥Çö ¹æ½ÄÀÇ ¼Ö¸®µå ¸ðµ¨°ú ºñ´Ù¾çü ¸ðµ¨°£ÀÇ ÀÚ·á º¯È¯", ±¹¹Î´ëÇб³ °øÇбâ¼ú ³í¹®Áý , Á¦20±Ç , pp.411-420, 1998.2.

 

 

¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬¦¬

 

Intelligence and Interaction Laboratory, Room No. 330, Engineering Hall, Graduate School of Automotive Engineering, Kookmin University, 77 Jeongneung-ro, Seongbuk-gu, Seoul, 02707, Korea. Tel : +82-2-910-5151
[¿ìÆí¹øÈ£: 02707] ¼­¿ïƯº°½Ã ¼ººÏ±¸ Á¤¸ª·Î 77, ±¹¹Î´ëÇб³ ÀÚµ¿Â÷°øÇÐÀü¹®´ëÇпø, °øÇаü 330È£, Áö´É ÀÎÅÍ·¢¼Ç ½ÇÇè½Ç. Tel : 02-910-5151